• Features:
Polytetrafluoroethylene, film, and tape are made by machining polytetrafluoroethylene molded blanks. They have excellent dielectric properties, no aging, the best chemical corrosion resistance, and a wide range of strength for use. The film is an non oriented film, which is developed into oriented and semi oriented films through compression.
• Purpose:
Substrate seals and lubricating materials used in various media, as well as electrical insulation components used at various frequencies. Capacitor dielectric, wire insulation, electrical appliances
Physical and mechanical performance indicators:
Experimental project | Company | ||
Directional membrane | Non oriented membrane | ||
tensile strength | MPA | ≥30.0 | ≥10.0 |
elongation at break | % | ≥30.0 | ≥10.0 |
1MH2Dielectric loss angle tangent value ≤ 0.01mm >0.01mm | ---- | 3.0 * 104 | ---- |
2.5 * 104 | |||
1MH2Dielectric constant | ---- | Average value 1.8-2.2 | ---- |
DC breakdown voltage (at room temperature) | KV/mm | The average value is 200 | Average value 40 |
Minimum value 40 | Minimum value 4 |
• PTFE turning film specifications:
Thickness (mm) | Width (mm) | Length (mm) |
0.01mm ~ 0.5mm | 8mm ~ 1200mm | Any length/roll packaging |
• Features:
Polytetrafluoroethylene, film, and tape are made by machining polytetrafluoroethylene molded blanks. They have excellent dielectric properties, no aging, the best chemical corrosion resistance, and a wide range of strength for use. The film is an non oriented film, which is developed into oriented and semi oriented films through compression.
• Purpose:
Substrate seals and lubricating materials used in various media, as well as electrical insulation components used at various frequencies. Capacitor dielectric, wire insulation, electrical appliances
Physical and mechanical performance indicators:
Experimental project | Company | ||
Directional membrane | Non oriented membrane | ||
tensile strength | MPA | ≥30.0 | ≥10.0 |
elongation at break | % | ≥30.0 | ≥10.0 |
1MH2Dielectric loss angle tangent value ≤ 0.01mm >0.01mm | ---- | 3.0 * 104 | ---- |
2.5 * 104 | |||
1MH2Dielectric constant | ---- | Average value 1.8-2.2 | ---- |
DC breakdown voltage (at room temperature) | KV/mm | The average value is 200 | Average value 40 |
Minimum value 40 | Minimum value 4 |
• PTFE turning film specifications:
Thickness (mm) | Width (mm) | Length (mm) |
0.01mm ~ 0.5mm | 8mm ~ 1200mm | Any length/roll packaging |
Previous article: 没有了!
Next article: PTFE oriented film