FEP transparent corrugated tube
High and low temperature resistance: -196--200℃ High temperature strength is twice that of F4
Non-stickiness, water resistance, oil resistance: no fouling and stagnation inside and outside the tube wall
Electrical reliability, high insulation
The dielectric constant viscosity is 2.1 at high and low temperatures of 60HZ-60MHZ. Even if the surface is damaged by diving, no conductive tracks will be generated.
Volume resistance>1018ΩM
Surface resistance>2*1013Ω
Arc resistance>165 seconds No leakage
Corrosion resistance
Only elemental fluorine and alkali metals react with it at high temperature, and have no effect on all other concentrated and dilute inorganic and organic acids, alkalis, and esters
Low water absorption: low absorption rate<0.01%
Non-flammable: Will not burn in air. (Oxygen index>95VOL.%)
Non-toxic: Physiologically inert
High transparency: Lowest light refractive index among all plastics
Weather resistance: Can be exposed to ozone and sunlight for a long time
FEP corrugated pipe is made by special processing method, which changes the previous characteristics of pipes that cannot be bent. It can be used to replace graphite, ceramic, glass and other pipes with low mechanical strength. It can be used as feeding and discharging pipes for tank trucks, storage tanks, containers and reactors. It can be used for pipe dislocation connection or to balance pipe displacement and size changes caused by climate or other reasons or to eliminate vibration of high-frequency machinery. In special occasions, it can also be used as a tubular reactor and exchanger. We can provide corrugated hoses with DN10-150mm and length of 20-20000 mm. Special specifications can be customized. The standard wall thickness is 1-2.5 mm. The thinnest wall thickness can be 0.5 mm. Fatigue times ≥10000 times. We can provide pressure-resistant corrugated hoses with mesh sleeves. There are many ways to connect corrugated hoses. Generally, flange connection, oil connection, threaded connection, quick connector and direct connection with customer parts can be used, fixed with pipe clamps and metal wires
FEP transparent corrugated tube
High and low temperature resistance: -196--200℃ High temperature strength is twice that of F4
Non-stickiness, water resistance, oil resistance: no fouling and stagnation inside and outside the tube wall
Electrical reliability, high insulation
The dielectric constant viscosity is 2.1 at high and low temperatures of 60HZ-60MHZ. Even if the surface is damaged by diving, no conductive tracks will be generated.
Volume resistance>1018ΩM
Surface resistance>2*1013Ω
Arc resistance>165 seconds No leakage
Corrosion resistance
Only elemental fluorine and alkali metals react with it at high temperature, and have no effect on all other concentrated and dilute inorganic and organic acids, alkalis, and esters
Low water absorption: low absorption rate<0.01%
Non-flammable: Will not burn in air. (Oxygen index>95VOL.%)
Non-toxic: Physiologically inert
High transparency: Lowest light refractive index among all plastics
Weather resistance: Can be exposed to ozone and sunlight for a long time
FEP corrugated pipe is made by special processing method, which changes the previous characteristics of pipes that cannot be bent. It can be used to replace graphite, ceramic, glass and other pipes with low mechanical strength. It can be used as feeding and discharging pipes for tank trucks, storage tanks, containers and reactors. It can be used for pipe dislocation connection or to balance pipe displacement and size changes caused by climate or other reasons or to eliminate vibration of high-frequency machinery. In special occasions, it can also be used as a tubular reactor and exchanger. We can provide corrugated hoses with DN10-150mm and length of 20-20000 mm. Special specifications can be customized. The standard wall thickness is 1-2.5 mm. The thinnest wall thickness can be 0.5 mm. Fatigue times ≥10000 times. We can provide pressure-resistant corrugated hoses with mesh sleeves. There are many ways to connect corrugated hoses. Generally, flange connection, oil connection, threaded connection, quick connector and direct connection with customer parts can be used, fixed with pipe clamps and metal wires
Previous article: PTFE push tube
Next article: Fully transparent FEP tube