Fully transparent FEP heat shrink tubing_Shenzhen Fenlida Plastic Products Co., Ltd.

return

Detailed Introduction

FEP heat shrink tubing

FEP (F46) heat shrink tubing has the characteristics of high temperature resistance, corrosion resistance, high pressure resistance, flame retardancy and long-term non-aging. It is widely used in aerospace, instrumentation, textile and chemical industry, food and medical, electronic appliances, post and telecommunications, petrochemical industry, metallurgical electronics, railway transportation, motors and electrical appliances, household appliances, high-rise buildings, lighting, special transformers, special cables, sensors, thermal components and other industries.

Characteristics

High and low temperature resistance -195-200

Shrinkage temperature: 300℃~340℃ , non-sticky, water-resistant, oil-resistant

Water contact angle θ=114о,

Non-flammable

Will not burn in the air (oxygen index＞95VOL%)

, corrosion resistance

Only elemental fluorine and alkali metals react with it at high temperature, and have no effect on all other concentrated and dilute inorganic and organic acids, alkalis, and esters,

Electrical reliability, high insulation

The dielectric constant viscosity is 2.1 at high and low temperatures of 60HZ-60MHZ. Even if the surface is damaged by diving, no conductive tracks will be produced. Volume resistance＞1018ΩM, surface resistance＞1013Ω, arc resistance＞165 seconds, no leakage

Low friction

Dynamic friction coefficient 0.2-0.3,

Applications

Office machinery 　Roller　Wrapping

Papermaking machinery 　Roller　Wrapping

Printing and dyeing machinery 　Roller　Wrapping

Printing machine 　Roller　Wrapping

Insulating sheath motor rotor main insulation Water treatment, oil field and other industries magma sample preparation

Inner diameter before shrinkage (MM) &nbsp ; internal diameter pre-shrink	Inner diameter after shrinkage (MM) internal diameter post-shrink	Wall thickness post-shrink wall thickness post-shrink	Length (M) length
3.8	2.7	0.2-0.25	100
4.5	3.3	0.2-0.25	100
5.5	4.3	0.2-0.25	100
7.0	5.1	0.2-0.35	100
7.9	6.0	0.2-0.35	100
10.6	7.4	0.3-0.45	50
12.5	8.8	0.3-0.45	50
14.5	10.7	0.3	50
17.3	12.8	0.4	50
19	16.5	0.5	50
21	18.5	0.5	20
24	19.5	0.5	20
26	21.5	0.5	20
30	24	0.5	20
33	27	0.5	20

Inner diameter before shrinkage (MM) internal diameter pre-shrink	Inner diameter after shrinkage (MM) internal diameter post -shrink	Wall thickness after shrinkage wall thickness post-shrink	Length (M) length
36	28.5	0.5	2
43	34	0.5	2
52	40	0.5	2
57	49	0.5	2
63	50	0.5	2
67	53	0.5	2
76	61	0.5	2
82	64	0.5	2
91	73	0.5	2
98	82	0.5	2
106	84	0.6	2
110	86	0.6	2
118	96	0.6	2
136	103	0.6	2
156	125	0.6	3

Note: The above are only some of the specifications, other specifications can be customized according to customer requirements.

Previous article: Fully transparent FEP tube

Next article: Fully transparent PFA tube

QQ consultation

Telephone consultation

return

Detailed Introduction

Previous page

Next page